Pages

How to Make a Hanging Spider for Halloween

10/15/2016

Spiders are a classic Halloween decoration. This simple and fun project can be done quickly and can't fail to attract attention as it hangs in a doorway or window.

EditSteps

  1. Start the spider's body.  Cut out a 4-5 inch square of cardboard from a discarded grocery box.  It must be corrugated cardboard.  Hold it so the small holes in the lining of the cardboard are going from side to side.
    Startbody.jpg
  2. Draw, on the cardboard, a circle for the body.  Draw a smaller circle at the top for the spider's head.  Go all the way to the edges of the cardboard to maximize the space and give you a large spider.
    Drawoncardboard.jpg
  3. Cut it out.  Ordinary household scissors work fine.
    Cutitout.jpg
  4. Create the hanger.  Use a large paper clip that you have bent into a flat shape.  Bend one end straight, form a hooked shape.
    Createhanger.jpg
  5. Poke this clip through the center of the body.  Tape it on the front and back using masking tape.
    Poke thrubody.jpg
  6. Create a loop for hanging.  Use a needle nose pliers to bend the wire at of the top.
    Makealoop.jpg
  7. Double check to see that the holes inside the cardboard are going from side to side across the body.  You will use these holes to secure the legs.
    Doublecheckholes.jpg
  8. Fatten the body and head on both sides.  Wad up small pieces of newspaper and tape the pads to the top and bottom of the spider using long strips of masking tape.
    Fattenbodyhead.jpg
  9. Cover the spider entirely in black crepe paper streamers.  Criss-cross the crepe paper as you work.  Stretch the streamers slightly as you wrap to make it conform to the rounded edges of the head and body.  At the end, finish by gluing the strip with tacky glue.
    Coverspider.jpg
  10. Locate the holes for the legs.  Use a toothpick to find them.
    Useatoothpick.jpg
  11. Insert the legs.  Go in the holes you made with the toothpick, sticking half a black craft stem or fuzzy pipe cleaner into the hole.  It will stay, but to be extra sure, you can dip the end of the pipe cleaner into tacky glue.
    Addthelegs.jpg
  12. Continue adding legs.  Make as many as you wish.  Bend them at the knee and out to create a foot.
  13. Make the spider's face.  Use tacky glue to place googly eyes.  If you want a mouth, cut a tiny sliver of white paper and glue it in place.
    Makeface.jpg
  14. Decorate the spider with colorful craft balls.  Be creative and embellish this spider as much as you wish.
    Decoratespider.jpg
  15. Run a piece of twine through the hole in the paper clip hanger.  Knot it securely.
    Runastring.jpg
  16. Hang your spider in a window or at the top of a doorway.  This will be a chilling surprise for visitors.
    Hangyourspider.jpg

EditWarnings

  • Supervise young children when using scissors.

EditThings You'll Need

  • Corrugated cardboard
  • Scissors
  • Pencil
  • Large paper clip
  • Masking tape
  • Needle nose pliers
  • Newspaper
  • Black crepe paper streamers
  • Tacky glue
  • Toothpick
  • Black craft stem or fuzzy pipe cleaner
  • Googly eyes
  • White paper
  • Colorful craft balls
  • Twine

EditRelated wikiHows


Source: http://www.wikihow.com/Make-a-Hanging-Spider-for-Halloween